Coupling type hot rolling mandrel

Coupling type hot rolling mandrel

 

The mandrel moves axially in the hollow shaft under the action of the expansion and contraction hydraulic cylinder, the inclined surface of the mandrel pushes the plunger in the radial hole of the hollow shaft to move outward, and the upper end face of the plunger pushes the segment to expand outward, to realize the reel to the expansion diameter.When the coil is finished, the mandrel moves axially in the opposite direction under the action of the expansion and contraction cylinder, the segment is pulled by the connecting rod to shrink inward, the plunger moves inward, and the diameter of the reel is reduced to the uncoiled state , to start unloading the coil.


Main technical parameters:

Expansion and contraction range: φ 727~ φ 762

Max. coil weight: 40 Ton

Max. coil width: 2130mm

Thickness of strip: 0.8~25.4mm


HUNAN KEMEIDA ELECTRIC CO., LTD. All Rights Reserved           湘公網(wǎng)安備43060402000026號(hào)        湘ICP備16013601號(hào)-1